This electrical distribution cabinet is intended for electrical installations. Its high protection rating and gasket allow for outdoor use. The galvanized steel mounting plate enables the installation of equipment without compromising the cabinet's structure. A mounting kit is included. Specifications: Full mounting plate made of 1 mm galvanized steel Set of self-tapping screws for mounting the plate and brackets Two triangle locks Triangle lock key (10 mm) Material: ABS Protection rating: IP65 (protection against access to hazardous parts with a wire, dust-tight protection, protection against water jets (12.5 l/min) from any direction) Impact protection rating: IK10 (resistance to impacts with an energy of 20 J) UV radiation protection Full protection against alkalis and acids Moisture resistance Operating temperature range: -40°C to 70°C Operating at a nominal voltage up to 690 V Operating at a maximum current up to 800 A Door opening angle: 180° Color: gray (RAL 7035) Option to install a keyed lock External dimensions: Height: 800 mm Width: 600 mm Depth: 280 mm Internal dimensions: Height: 730 mm Width: 550 mm Depth: 220 mm We also offer other sizes of mounting cabinets: 20x30x13 25x35x15 30x40x17 30x40x22 35x50x19 40x50x18 40x50x24 40x60x20 60x80x28

Read more less

Surface-mounted Electrical Distribution Board for Electrical Installations Specification: Height: 23.8 cm Width: 28.1 cm Depth: 10.4 cm Number of modules: 12 Number of rows: 1 Designed for electrical installations Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Surface-mounted Electrical Distribution Board for Electrical Installations Specification: Height: 23.9 cm Width: 38.8 cm Depth: 10.4 cm Number of modules: 18 Number of rows: 1 Made of plastic Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Surface-Mounted Distribution Board designed for electrical installations without a cover. Specification: Height: 14 cm Width: 8.7 cm Depth: 6.8 cm Number of Modules: 4 Number of Rows: 1 Surface-mounted installation Made of plastic Protection: IP30 Color: White No cover Free mounting kit included

Read more less

Surface-mounted Electrical Distribution Board for Electrical Installations Specification: Height: 18.8 cm Width: 22.7 cm Depth: 10.4 cm Made of plastic Number of modules: 9 Number of rows: 1 Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Surface-Mounted Distribution Board designed for electrical installations. Specification: Height: 35 cm Width: 28.3 cm Depth: 10.4 cm Number of Modules: 12 Number of Rows: 2 Made of plastic Protection: IP40 Color: White Smoke-colored doors Free mounting kit included Note: Picture for reference only - offer does not include breakers.

Read more less

Surface-mounted distribution board designed for electrical installations. Specifications: Height: 46 cm Width: 27.5 cm Depth: 9.5 cm Number of modules: 12 Number of rows: 3 Surface mounting Made of plastic Protection: IP40 Color: white Smoke-colored doors Free mounting kit included Image for reference only - offer does not include circuit breakers.

Read more less

The surface-mounted distribution box Esy without a cover is designed for electrical installations. Specification: Height: 14 cm Width: 8.7 cm Depth: 6.8 cm Number of modules: 4 Number of rows: 1 Surface-mounted installation Made of plastic Protection rating: IP40 Operating temperature: -25°C to +65°C Suitable for devices with a voltage of 230V/400V Color: white Without cover

Read more less

Flush-mounted Electrical Distribution Board for Electrical Installations Specification: Height: 23.8 cm Width: 28.1 cm Depth: 10.4 cm Number of modules: 12 Number of rows: 1 Made of plastic Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Flush-mounted Electrical Distribution Board for Electrical Installations Specification: Height: 23.9 cm Width: 38.8 cm Depth: 10.4 cm Number of modules: 18 Number of rows: 1 Made of plastic Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Flush-mounted distribution board designed for electrical installations. Specification: Height: 18.8 cm Width: 22.7 cm Depth: 10.4 cm Number of modules: 9 Number of rows: 1 Made of plastic Protection: IP40 Color: White Smoke-tinted doors Free mounting kit included Sample image – offer does not include circuit breakers.

Read more less

Flush-mounted distribution board designed for electrical installations. Specifications: Height: 46 cm Width: 27.5 cm Depth: 9.5 cm Number of modules: 12 Number of rows: 3 Designed for electrical installations Surface mounting Made of plastic Protection: IP40 Color: white Smoke-colored doors Free mounting kit included Image for reference only - offer does not include circuit breakers.

Read more less

The E.NEXT isolating switch serves as the main emergency switch. It protects against the effects of short circuits and overloads. The switch conducts current under nominal conditions and also in the event of a short circuit or overload in electrical installations. It ensures safe operation during the handling and servicing of devices and networks. The switch housing and all non-metallic parts inside the switch are made of non-flammable ABS plastic. Reinforced contact terminals have grooves that improve mechanical stability and ensure reliable contact. Specifications: Protection level: IP20 Made of non-flammable ABS plastic Max. cross-section of connected wires: 1 to 25 mm² Mounting on a standard DIN 35 mm rail Two fixed mounting positions on the DIN rail Connection method: top and bottom Operating temperature: -25°C to +40°C Rated voltage: 230/400V~ Rated frequency: 50 Hz Number of poles: 1 Mechanical lifespan: not less than 10,000 cycles Terminal tightening torque: 3Nm Rated current: 63A CE Certificate

Read more less

The isolating switch from E.NEXT is used as a main emergency breaker. It protects against the effects of short circuits and overloads. The switch conducts current under nominal conditions as well as during short circuits or overloads in electrical installations. It ensures safe operation during the handling and servicing of devices and networks. The switch’s housing and all non-metallic internal parts are made of flame-resistant ABS material. Reinforced contact terminals have grooves that enhance mechanical stability and ensure reliable contact. Specifications: Protection degree: IP20 Max. connected wire cross-section: 1 to 25 mm² Mounting: Standard DIN rail 35 mm DIN rail positions: Two fixed positions Connection method: Top and bottom Operating temperature: -25°C to +40°C Rated voltage: 400V~ Rated frequency: 50 Hz Number of poles: 3 Mechanical lifespan: Not less than 10,000 cycles Terminal tightening torque: 3 Nm Rated current: 63A CE Certificate

Read more less

CORRUGATED ELECTRICAL INSTALLATION METAL CONDUIT WITH PILOT NON-FLAMMABLE FI 18/21 750N 50M This high-strength ( 750N ) corrugated conduit is designed to protect cables and wires in electrical and telecommunications installations in industrial and residential buildings. Its increased mechanical resistance makes it ideal for demanding installation conditions, whether flush-mounted, wall-mounted, or in concrete. Its corrugated surface allows for flexible adaptation to various installation shapes. In addition to protecting against mechanical damage, moisture, and temperature fluctuations, the pipe is non-flammable and does not spread fire, increasing installation safety. Additionally, it features a metal guide that facilitates cable insertion. Designed for indoor use, it can also be used outdoors. Specification: Inner size: 18 mm Outer size: 21 mm Material: non-flammable PVC Pressure resistance: 750N Operating temperature: -15°C to 60°C Leading pilot Degree of protection: IP30 Protection against mechanical damage Resistance to fire spread Flexible Weight: 5.50 kg Quantity per package: 50 m CE certificate The auction is for a 50 m package.

Read more less

CORRUGATED METAL CONDUIT PIPE WITH DRAW WIRE AND PVC COATING FI 32/36 25 M The corrugated conduit pipe, made of galvanized steel, is used, among other things, in electrical and photovoltaic installations, flush-mounted systems, and cable tunnels. It provides protection for cables and wires against mechanical damage. The presence of corrugations allows for various ways of routing electrical installations. The black PVC pipe coating features high resistance to pressure and abrasion. Specification: Internal size: 32 mm External size: 36 mm Material: galvanized sheet metal with PVC coating Compression strength: 320N Operating temperature: from -15°C to 60°C Guide draw wire Protection against mechanical damage Flame retardant Flexible Weight: 7.82 kg Quantity in package: 25 m CE certificate

Read more less

The corrugated conduit is designed to protect cables and wires in electrical installations. Specification: Outer size: 15.7 mm Inner size: 11.2 mm Material: PVC Quantity in package: 100 m Halogen-free Minimum pressure resistance: 320N/5 cm Protection rating: IP40 Operating temperature: from -25°C to 60°C Guide wire included Resistant to moisture, temperature, harmful substances, and mechanical factors Color: grey

Read more less

The corrugated conduit is designed to protect cables and wires in electrical installations. Specification: Outer size: 19.85 mm Inner size: 14.40 mm Material: PVC Quantity in package: 100 m Halogen-free Minimum pressure resistance: 320N/5 cm Protection rating: IP40 Operating temperature: from -25°C to 60°C Guide wire included Resistant to moisture, temperature, harmful substances, and mechanical factors Color: grey

Read more less

The corrugated conduit is designed to protect cables and wires in electrical installations. Specification: Outer size: 24.70 mm Inner size: 19.10 mm Material: PVC Quantity in package: 50 m Halogen-free Minimum pressure resistance: 320N/5 cm Protection rating: IP40 Operating temperature: from -25°C to 60°C Guide wire included Resistant to moisture, temperature, harmful substances, and mechanical factors Color: grey

Read more less

Corrugated Conduit Pipe Peszel Fi 25/32 50 m with Pilot Wire, 750N, Non-Flammable The high-strength corrugated conduit pipe (750N) is designed to protect cables and wiring in electrical and telecommunication installations in both industrial and residential construction. Thanks to its enhanced mechanical resistance, it performs excellently in demanding installation conditions, including flush-mounted, surface-mounted, and concrete applications. Its corrugated surface allows for flexible adaptation to various installation shapes. In addition to protecting against mechanical damage, moisture, and temperature fluctuations, the pipe is non-flammable and does not spread fire, increasing installation safety. Additionally, it is equipped with a metal pilot wire that facilitates cable insertion. Designed for indoor use but also suitable for outdoor applications. Specification: Inner diameter: 24.70 mm Outer diameter: 31.80 mm Material: Non-flammable PVC Compression resistance: 750N Operating temperature: -15°C to 60°C Pilot wire included Protection rating: IP30 Protection against mechanical damage Flame-retardant Flexible Weight: 5.50 kg Package length: 50 m CE certified

Read more less

The corrugated conduit is designed to protect cables and wires in electrical installations. Specification: Outer size: 32 mm Inner size: 26 mm Material: PVC Quantity in package: 50 m Halogen-free Minimum pressure resistance: 320N/5 cm Protection rating: IP40 Operating temperature: from -25°C to 60°C Guide wire included Resistant to moisture, temperature, harmful substances, and mechanical factors Color: grey

Read more less